Geeetech

Hey

I want to upgrade my printer with a dual Extruder with a 2-in and 1-out hotend. I bought this one: https://www.geeetech.com/2-in-1-out-dua ... -1038.html and also a second stepper motor and the driver.

The problem I have now is that I don´t know how i have to reprogram my printersoftware. I need two steppers but only one thermistor.

Do you have any ideas how to do this?

Hi, maybe you can refer to this :http://www.geeetech.com/forum/viewtopic ... 13&t=17887
I hope this can help you.