Error message in Arduino 1.8.6

Post Reply
mayaman59
Posts: 7
Joined: Fri Aug 24, 2018 8:01 pm

Error message in Arduino 1.8.6

Post by mayaman59 » Tue Sep 04, 2018 6:18 pm

Hi guys, I'm beginner so it's very hard for me understanding printing software process. After opened configuration.h file for my motherboard in Arduino I verified it before uploading it but I received an error message. I'm not able to solve, like I said before, I'm new on this. I screen captured that message hoping that someone with a lot of patience may explain me what should I do to fix the error and go on.

(I see that something must be enabled to keep power flowing but I don't know what and where should I enable it)
Senza titolo.png
Senza titolo.png (78.61 KiB) Viewed 4560 times
thanks in advance

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Error message in Arduino 1.8.6

Post by William » Thu Sep 06, 2018 9:58 am

You need to upload the firmware with the correct Arduino version.
If the version of Arduino higher than firmware too much.
The standard of the function definition has been changed.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

mayaman59
Posts: 7
Joined: Fri Aug 24, 2018 8:01 pm

Re: Error message in Arduino 1.8.6

Post by mayaman59 » Thu Sep 06, 2018 4:40 pm

Hi William thanks for your reply. Can you help me to know which firmware I have and which one is the right version of Arduino I need? As I said I'm very beginner in this. Thanks for your time anyway.

Nosyok_
Posts: 1
Joined: Sat Sep 08, 2018 10:08 pm

Re: Error message in Arduino 1.8.6

Post by Nosyok_ » Sat Sep 08, 2018 10:10 pm

Try with Arduino 1.8.5, it solved the problem for me. :)

Post Reply