Setting baud Rate

Post Reply
funkyg
Posts: 1
Joined: Thu Aug 16, 2018 12:44 am

Setting baud Rate

Post by funkyg » Thu Aug 16, 2018 12:49 am

Hi. I have read that my printer problems are due to incorrect baud rate. It should be set to 250000, but this is not an available option in device manager. How do I get my pc ( Win10) to let me choose the correct baud rate?

Thanks,

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Setting baud Rate

Post by _kaktus_ » Thu Aug 16, 2018 1:56 am

Hi
:mrgreen:

Cross your bridge when you come to it. ;)

Simply install your favorite slicer program and set the required parameters in its configuration.

I suggest you avoid the device manager. :D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply