BL Touch Working Configuration

Post Reply
kewlape
Posts: 1
Joined: Mon Apr 02, 2018 12:44 am

BL Touch Working Configuration

Post by kewlape » Tue Jun 05, 2018 2:26 am

Hi

attached is my working Marlin 1.1.8 configuration.h with BL Touch working if you would like to use.

Please feel free to use or suggest any improvements.

I have the Z axis anti wobble installed. The BL touch works great for the most part but I am struggling with the Z offset when I change or maintain the head. I store the Z Offset in the EEPROM which allows me flexibility with changing the offset on the fly i needed.

[attachment=0]Configuration.zip[/attachment]
Attachments
Configuration.zip
Configuration.H Changes with BL Touch
(22.02 KiB) Downloaded 394 times

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: BL Touch Working Configuration

Post by Gingko » Tue Jun 05, 2018 11:29 am

Thanks for sharing!! :D

neowinx
Posts: 7
Joined: Thu Apr 12, 2018 8:36 am

Re: BL Touch Working Configuration

Post by neowinx » Mon Jul 02, 2018 12:28 pm

My savior! Will try this ASAP. Thanks for sharing!
Printer: Geeetech Prusa I3 Pro W
Firmware: Marlin 1.1.8 with BLTouch

neowinx
Posts: 7
Joined: Thu Apr 12, 2018 8:36 am

Re: BL Touch Working Configuration

Post by neowinx » Fri Jul 06, 2018 7:57 am

Well, I have used this Configuration and works very well, but I still can't find a more finer configuration to print with the quality advertised with almost everyody that uses an auto bedleveling device.

This are my prints of the same filament between the various prinst that I have tested

https://drive.google.com/file/d/1ElRHd0 ... p=drivesdk

https://drive.google.com/file/d/1X7L3Qt ... p=drivesdk

Your configuration with the Marlin 1.1.8 version with BL Touch shows goshting in my print, and the older Marlin 1.0.4 with the BL Touch prints well, but not as good as when I use the vanilla Marlin 1.0.4 version provided by Geeetech and having to manually level the bed.

So, as for me, I will stick with this old version in the meantime as it works well for me anyways.

EDIT: Corrected the images links. Sorry for not correcting it before :oops:
Last edited by neowinx on Wed Jul 11, 2018 12:07 pm, edited 2 times in total.
Printer: Geeetech Prusa I3 Pro W
Firmware: Marlin 1.1.8 with BLTouch

User avatar
_kaktus_
Site Admin
Posts: 1255
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: BL Touch Working Configuration

Post by _kaktus_ » Fri Jul 06, 2018 1:25 pm

Hi
:mrgreen:
I think you can have everything at once.
But there is a long way to go with adjusting the work parameters. ;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest