3d touch not work

Post Reply
v tec
Posts: 10
Joined: Sat May 26, 2018 10:41 pm

3d touch not work

Post by v tec » Sat May 26, 2018 10:49 pm

hi from france

i have a i3 pro w with gt2560 motherboard

i have just instal a 3dtouch probe with this tutorial


http://www.geeetech.com/wiki/index.php/ ... ing_Sensor

i have dowload the marlin here

viewtopic.php?t=17046


number 13)

download/file.php?id=3543

i have upload the marlin with arduino ide 1.0.1

when i start the machine , the probe down 2 time, and stay up with fix blue light


if i send a manual g code with repetier, there is no effect


if i click on z homing button , the probe axis not down, i need to turnoff the machine for not crash it

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: 3d touch not work

Post by Gingko » Mon May 28, 2018 6:27 pm

Hi,
Have you already did the firmware setting before upload it?

Ingybing
Posts: 5
Joined: Wed Jun 27, 2018 5:39 pm

Re: 3d touch not work

Post by Ingybing » Mon Jul 02, 2018 2:18 pm

If you’ve got the 2560 rev A+ board there 3 pins below the thermistor ports. There was no need to mod the board it if the A+. This is where the three wires should be connected. Then my probe started to respond to commands. Still not got it working though. The probe point doesn’t seem long enough.

Post Reply