Z Axis Issues

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Z Axis Issues

Post by William » Wed Apr 01, 2020 3:33 pm

Hi, regarding the situation of z-axis freeze,
You can check
Whether the z-axis threaded rod is bent;
Whether the coupling is installed correctly;
Whether the brass nut is too tight;
Whether the left and right z axes are on the same horizontal line.

You can refer to: http://geeetech.com/forum/viewtopic.php?f=82&t=60931
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

furi
Posts: 1
Joined: Mon Jan 20, 2020 2:34 am

Re: Z Axis Issues

Post by furi » Mon Apr 06, 2020 4:09 am

Pasos a seguir para intentar solucionar el problema.
Afloja los tornillos de la tuerca de latón.
Cambia los topes/anillos de la varilla lisa del eje X a la parte interior de los carros negros de metal (ahora los llevas por la exterior) y aprieta firmemente.
Esto te dejará apretar mas firmemente la correa dentada sin problemas de perdida de pasos.
Suele ser la tensión de la correa dentada la que hace perder pasos al motor.

Post Reply