Problems with Extruder - 1
-
- Posts: 4
- Joined: Thu Aug 13, 2020 7:40 am
Problems with Extruder - 1
If I input an extrusion of 10mm extruder 0 will extrude exactly that, 10mm. However, if I input an extrusion of 10mm it will extrude about 100 mm. I don't know what setting will change the extruder settings for just the second extruder, any advice? I am using the dvr8255 motor drivers as well.
Re: Problems with Extruder - 1
Hello, you can check the step value of extruder 1, it may be too large, you can also check whether the spring of extruder 1 is loose, resulting in too fast feeding.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!