Page 1 of 1

Hotend

Posted: Mon Jan 13, 2020 4:58 pm
by I3procUSER
The hotend seems to have smaller dimensions compared to the MK8 hotend. Can you give us the specs for it? Which nozzle I can use and which silicone cover would fit.

On other hotends there is a PTFE Tube, which goes into the nozzle (i3 pro w).

Re: Hotend

Posted: Mon Jan 13, 2020 5:48 pm
by William
Hi, the Nozzle is 0.3mm
GTH6010-M01-175

The heating block is 7075-T6
GHT6010-M02-R