When I start printing on my i3 pro C, the pieces come out somewhat smaller than the 3d model.
Configuration problems, Tension straps,
Lost of steps.
Can somebody help me
printed measurements smaller than stl
Re: printed measurements smaller than stl
Hi, You can provide your printed picture so that we can better solve the problem.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: printed measurements smaller than stl
Hello.
You need to calibrate your printer.
Look for the calibration cube and check the results.
You need to calibrate your printer.
Look for the calibration cube and check the results.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.