printed measurements smaller than stl

Post Reply
ALBERTO
Posts: 1
Joined: Tue Dec 10, 2019 12:47 am

printed measurements smaller than stl

Post by ALBERTO » Tue Dec 10, 2019 1:04 am

When I start printing on my i3 pro C, the pieces come out somewhat smaller than the 3d model.
Configuration problems, Tension straps,
Lost of steps.

Can somebody help me

User avatar
William
Site Admin
Posts: 5934
Joined: Tue Jun 07, 2016 9:38 am

Re: printed measurements smaller than stl

Post by William » Tue Dec 10, 2019 9:15 am

Hi, You can provide your printed picture so that we can better solve the problem.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
_kaktus_
Site Admin
Posts: 1255
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: printed measurements smaller than stl

Post by _kaktus_ » Sun Dec 15, 2019 7:20 pm

Hello.
:mrgreen:

You need to calibrate your printer.

Look for the calibration cube and check the results.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests