No way to level bed

Mr.Hotwire
Posts: 16
Joined: Mon Jun 24, 2019 9:16 am

Re: No way to level bed

Post by Mr.Hotwire » Wed Jul 10, 2019 10:58 am

Both upper and lower rods are 7.83mm in diamter, both upper and lower locking rings are tight.

User avatar
William
Site Admin
Posts: 5111
Joined: Tue Jun 07, 2016 9:38 am

Re: No way to level bed

Post by William » Wed Jul 10, 2019 11:48 am

Hi, You may need to remove the hot bed and place it in a horizontal position to see if it is uneven.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Mr.Hotwire
Posts: 16
Joined: Mon Jun 24, 2019 9:16 am

Re: No way to level bed

Post by Mr.Hotwire » Wed Jul 10, 2019 1:16 pm

I have checked that the glass is flat, using a straight edge. And the glass is flat.

User avatar
William
Site Admin
Posts: 5111
Joined: Tue Jun 07, 2016 9:38 am

Re: No way to level bed

Post by William » Wed Jul 10, 2019 3:16 pm

Hi, do you have a hotbed under the glass?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Mr.Hotwire
Posts: 16
Joined: Mon Jun 24, 2019 9:16 am

Re: No way to level bed

Post by Mr.Hotwire » Thu Jul 11, 2019 1:24 am

yes, there is a heated bed under the glass. My machine is a Pro C.

User avatar
William
Site Admin
Posts: 5111
Joined: Tue Jun 07, 2016 9:38 am

Re: No way to level bed

Post by William » Thu Jul 11, 2019 9:13 am

Hi, have you checked if the hotbed is level? Remove the inspection on the horizontal plane?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest