Controlling both extruders through control panel

Post Reply
adrewbus
Posts: 2
Joined: Mon Jan 28, 2019 2:36 pm

Controlling both extruders through control panel

Post by adrewbus » Mon Jan 28, 2019 3:01 pm

Why is there only one extruder under the move axis menu? Should there be two? I just setup the printer and am having trouble feeding filament into the second extruder. Thanks.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Controlling both extruders through control panel

Post by William » Mon Jan 28, 2019 9:47 pm

I've checked the firmware of the PROC.
The menu of the PROC LCD is not correct. Maybe you can feedback it to the technical@geeetech.com
;)
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Tparent
Posts: 39
Joined: Sun Sep 30, 2018 3:54 pm

Re: Controlling both extruders through control panel

Post by Tparent » Tue Jan 29, 2019 5:46 am

Hello,

Which Marlin FW Version ?

Thierry
i3 B + i3 C + i3 M201 + A10 + A10m + A30
(+3 x Kossel)
Mostly PLA

adrewbus
Posts: 2
Joined: Mon Jan 28, 2019 2:36 pm

Re: Controlling both extruders through control panel

Post by adrewbus » Tue Jan 29, 2019 9:39 am

It currently has Version 1.0.04 as updated through the easy print software.
I also loaded the firmware on the firmware page, http://www.geeetech.com/forum/viewtopic ... 20&t=17046, using arduino. It loads as version 1.0.03.

Post Reply