3d printed filament guide for Geeetech MK8 extruder

[rita]

if you are using this geeetech Mk8 extruder,
http://www.geeetech.com/assembled-mk8-e ... kdgd5b87i6

you may find it difficult to get the felament right to the barrel, with this filament guide,it will be much easier.

he tested the 2mm version with filaflex, it works perfectly!

Flexible material guide for Geeetech MK8.jpg (106.62 KiB) Viewed 5926 times

Flexible material guide for Geeetech MK8-2.jpg (54.75 KiB) Viewed 5926 times

Download the stl.file here

Flexible_material_guide_for_Geeetech_MK8.zip

(152.69 KiB) Downloaded 643 times

This is designed by @ghugues on thingivers, you can find his project here
http://www.thingiverse.com/thing:801036