M201 & two colors of the filament in one layer.

Moderator: _kaktus_

Post Reply
User avatar
Site Admin
Posts: 1257
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL

M201 & two colors of the filament in one layer.

Post by _kaktus_ » Wed Aug 28, 2019 10:37 pm


The M201 is known for its ability to mix colors and create gradients. However, there is nothing to stop you from also making printouts where the two colours are clearly separated. This way you can achieve interesting effects. :!:

In order to achieve an effect similar to the one presented below, it is sufficient to properly prepare a model design. :idea:
obudowa_MicroBit.jpg (150.8 KiB) Viewed 7694 times
The blue elements are very small, which was an additional difficulty.
For making this model I used a nozzle with a diameter of 0.3mm. 8-)

If someone would like to make similar prints but does not know how to do it, please ask, prepare a manual. ;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

User avatar
Site Admin
Posts: 6192
Joined: Tue Jun 07, 2016 9:38 am

Re: M201 & two colors of the filament in one layer.

Post by William » Thu Aug 29, 2019 9:17 am

:D Thanks for your share.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest