Problem with Geeetech A30: Z Axis is 2-3mm above the bed at the start of the print!

Post Reply
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Problem with Geeetech A30: Z Axis is 2-3mm above the bed at the start of the print!

Post by William » Thu Aug 20, 2020 3:59 pm

Did you level the hot bed after auto home? If still not resolved, you can refer to the video settings below. :D
https://www.youtube.com/watch?v=tOxUrP2wOjA
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

RaveMO
Posts: 4
Joined: Sat Aug 14, 2021 2:11 pm

Re: Problem with Geeetech A30: Z Axis is 2-3mm above the bed at the start of the print!

Post by RaveMO » Sat Aug 14, 2021 2:17 pm

thank you very much!

Post Reply