Factory default

Post Reply
novawaves
Posts: 18
Joined: Fri Mar 20, 2020 3:16 pm

Factory default

Post by novawaves » Mon Mar 30, 2020 1:44 am

Please tell me how i can set everything to factory defaults, i think i used an unknown g code and changed the quality false so that the z axis dont work right now. Plesse tell me the parameters of the factory defaults variables or tell me how i can define them in the firmware

Thx

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Factory default

Post by William » Mon Mar 30, 2020 10:57 am

Hi, You can perform recovery operation through the screen
Or update the firmware again.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

novawaves
Posts: 18
Joined: Fri Mar 20, 2020 3:16 pm

Re: Factory default

Post by novawaves » Mon Mar 30, 2020 10:21 pm

ok thats what i have done , a firmware flash but the problem with my z axis is still there

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Factory default

Post by William » Tue Mar 31, 2020 10:24 am

novawaves wrote:
Mon Mar 30, 2020 10:21 pm
ok thats what i have done , a firmware flash but the problem with my z axis is still there
Hi, Is the z-axis motor not working properly?
You can exchange the other motor end wires with the z-axis motor wires.
Check if the motor cable is damaged.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply