I3 x with SKR 1.4 and noozles

Post Reply
lppinheiroca
Posts: 1
Joined: Thu Apr 16, 2020 8:48 pm

I3 x with SKR 1.4 and noozles

Post by lppinheiroca » Thu Apr 16, 2020 8:53 pm

I was wondering if there is any firmware available for the SKR1.4 Mainboard that i can use in my I3 X.
Also, what are the reference of the noozles that come included. MK8? E3BV6?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: I3 x with SKR 1.4 and noozles

Post by William » Fri Apr 17, 2020 9:26 am

Hi,this may be incompatibilities that may render some functions unusable.
The nozzle is MK8.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

sybatsix12
Posts: 2
Joined: Tue Dec 15, 2020 4:30 pm

Re: I3 x with SKR 1.4 and noozles

Post by sybatsix12 » Tue Dec 15, 2020 4:37 pm

If we use SPI drivers, such as TMC2130 SPI, we will have to place jumpers on the left pins as we see in this case in the controller for the X axis. Also, if we are ...
https://myhr.onl/

Post Reply