rostock 301, LCD flex wire...

Post Reply
Tio
Posts: 32
Joined: Wed Jul 25, 2018 4:50 am

rostock 301, LCD flex wire...

Post by Tio » Sun Aug 05, 2018 12:41 am

Hello!

I think is possible wire flex for connect LCD and main borard is damage, i´d like if can tell me where buy this .

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: rostock 301, LCD flex wire...

Post by Gingko » Mon Aug 06, 2018 4:44 pm

Hi, for those specific items, you can directly contact the sales.

Tio
Posts: 32
Joined: Wed Jul 25, 2018 4:50 am

Re: rostock 301, LCD flex wire...

Post by Tio » Mon Aug 06, 2018 10:20 pm

I put message for test if other buyers have same problem... or only for me

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: rostock 301, LCD flex wire...

Post by _kaktus_ » Tue Aug 07, 2018 3:24 am

Hi
:mrgreen:

FFC tape (Flexible Flat Cable) is not expensive.
This can be purchased from any online shop with electronic components.

You just need to know exactly what you are looking for.
The haracretic feature is the raster of leads.
Next, the number of wires, length. You must also make sure that the leads are on the same side, on both ends.

The cable type also specifies the code on the cable surface.
For example, my printer uses FFC tape AWM 20624.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Tio
Posts: 32
Joined: Wed Jul 25, 2018 4:50 am

Re: rostock 301, LCD flex wire...

Post by Tio » Mon Aug 13, 2018 5:25 pm

thanks for your info... support tell me I must replace board and lcd kit. I have a problem with lcd ad SD never read....

thanks!

browlciba
Posts: 3
Joined: Wed Sep 22, 2021 8:06 pm

Re: rostock 301, LCD flex wire...

Post by browlciba » Tue Nov 09, 2021 4:00 am

Had an issue where i got home to failed print and after i removed everything and wanted to start over i found that the bed would not heat up.
Then i had a closer look at the board and found that the PSU plug was all burned on one of the 12volt rails.

now i have to locate new plugs and solder a new one on to the board and hope nothing is fried.

But i cannot understand why / how this could have happend as the plug on the board and the cord are something what i made form the factory and not something you have to assemble your self.https://9apps.ooo/

ducklife
Posts: 31
Joined: Wed Oct 21, 2020 11:19 am

Re: rostock 301, LCD flex wire...

Post by ducklife » Fri Jul 22, 2022 3:01 pm

If you are looking for a game then poppy playtime will be a satisfying game for you if you are looking for a way to provide some downtime for you and your kids. There are hundreds of fun and exciting games available for you to try.

Post Reply