Cura profile for geeetech prusa i3 pro w

Share your configuration profile, please specify your printer model and the slicer software.
Post Reply
Paolor91
Posts: 1
Joined: Thu Apr 23, 2020 3:49 pm

Cura profile for geeetech prusa i3 pro w

Post by Paolor91 » Thu Apr 23, 2020 3:53 pm

Hello,
I have a printer geeetech prusa i3 pro w I would like to import it in Cura software but I can't get the profile, could you give me some directions ? thank you very much.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Cura profile for geeetech prusa i3 pro w

Post by William » Thu Apr 23, 2020 4:59 pm

Hi, you can download this configuration file.
Geeetech-I3ProW.rar
(399 Bytes) Downloaded 1283 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
didibxl
Posts: 1
Joined: Wed Jun 10, 2020 12:25 am
Location: Bruxelles

Re: Cura profile for geeetech prusa i3 pro w

Post by didibxl » Wed Jun 10, 2020 12:47 am

Hi ! I've downloaded in Cura 4.6.1. and that's not working on my Geeetech Prusa I3 Pro W, the printer is with 1 extruder and no G-Code to begin and ending the print.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Cura profile for geeetech prusa i3 pro w

Post by William » Wed Jun 10, 2020 9:09 am

didibxl wrote:
Wed Jun 10, 2020 12:47 am
Hi ! I've downloaded in Cura 4.6.1. and that's not working on my Geeetech Prusa I3 Pro W, the printer is with 1 extruder and no G-Code to begin and ending the print.
Hi,this is Cura's configuration file, about some parameter settings
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

laumonto
Posts: 1
Joined: Fri Oct 30, 2020 1:15 am

Re: Cura profile for geeetech prusa i3 pro w

Post by laumonto » Sat Nov 14, 2020 10:37 pm

Hi,

I have tried to import the cure profile but I get a warning saying that the file does not contain any valid profile. I have tried to import it from settings-> printer-> manage printers -> profiles-> import. Any ideas on how I can configure the cure profile for Geeetech prusa i3 pro w printer?

Jackatack4455
Posts: 1
Joined: Sun Dec 13, 2020 3:08 am

Re: Cura profile for geeetech prusa i3 pro w

Post by Jackatack4455 » Sun Dec 13, 2020 3:14 am

I have a GeeeTech i3 pro w and I downloaded the "resources" file and tried to apply it to cura 4.8 but nothing happened and it said "Cannot load (Definitions) file please try again later." I need a step by step explanation and some help because I currently cannot print without these files.

Carlson2852
Posts: 1
Joined: Wed Feb 24, 2021 5:19 pm

Re: Cura profile for geeetech prusa i3 pro w

Post by Carlson2852 » Wed Feb 24, 2021 5:25 pm

These are the only parameters I had to change (apart from choosing Prusa i3 as a machine on the James Armstrong's profile photo So some of these values are in direct conflict with what is listed in the Cura document that came with the I3. navyarmyccu

Post Reply