After assembling

Post Reply
User avatar
cloudprusa
Posts: 2
Joined: Mon Aug 13, 2018 5:02 pm

After assembling

Post by cloudprusa » Tue Aug 14, 2018 6:44 pm

Hi guys, I'm a newbie and I would to know what I must do after assembling.
I suppose I must follow these steps:

1) Install Repetier-host.
2) Install firmware and drivers.
3) Calibrate axes.
4) Calibrate extruder.
5) Print my first piece.

Are these steps correct?
Where can I find tutorials to do them?

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: After assembling

Post by _kaktus_ » Wed Aug 15, 2018 4:17 pm

Hi
:mrgreen:
You presented everything perfectly.
I don't know if you know there is a wiki site for all Geeetech products. It also contains the instructions you need.
In addition, I expect Geeetech to provide links to this information when describing your favorite printer.

:D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

dawnbailey1974
Posts: 1
Joined: Fri Feb 26, 2021 7:21 pm

Re: After assembling

Post by dawnbailey1974 » Fri Feb 26, 2021 7:26 pm

I believe you might find the sotution here https://www.the-essays.com/admission-essay because there are lots of samples and tutorials. I often fix my issues with their help.

WiseBlossom
Posts: 1
Joined: Tue Aug 03, 2021 3:24 pm

Re: After assembling

Post by WiseBlossom » Tue Aug 03, 2021 4:19 pm

_kaktus_ wrote:
Wed Aug 15, 2018 4:17 pm
Hi
:mrgreen:
You presented everything perfectly.
I don't know if you know there is a wiki site for all Geeetech products. It also contains the instructions you need.
In addition, I expect Geeetech to provide links to this information when describing your favorite printer.

:Ddgcustomerfirst
Thanks for the clarification

Hinton856
Posts: 1
Joined: Mon Aug 16, 2021 7:47 pm

Re: After assembling

Post by Hinton856 » Mon Aug 16, 2021 7:50 pm

Thank you for updating us with the outcome.

Paycheckrecords

Post Reply