Control boards..........

Post Reply
dave m
Posts: 2
Joined: Fri May 25, 2018 1:13 pm
Location: New Zealand

Control boards..........

Post by dave m » Fri May 25, 2018 1:22 pm

Whats the difference between......Mainboard of M201 is GTM32 PROVB
and the new board GT2560A ?

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Control boards..........

Post by _kaktus_ » Fri May 25, 2018 10:10 pm

Hi dave m.

The fundamental difference is the main microcontroller from another family.
GT motherboards are equipped with AVR 8-bit - ATmega 2560.
https://www.microchip.com/wwwproducts/en/ATmega2560

GTM motherboards, specifically GTM32 Pro vB, feature Cortex M3 32-bit STM32F103VET6.
http://www.st.com/en/microcontrollers/stm32f103ve.html

These are logical systems of a completely different class.
Photographs to watch:
[attachment=2]GTM32vA&vB.jpg[/attachment]
[attachment=1]IMG_9002.png[/attachment]
[attachment=0]GTM32Pro_vB.jpg[/attachment]

Unfortunately, I don't have any images of the GT2560 that I could boast of. But I think you have it ;-)
Attachments
GTM32Pro_vB.jpg
GTM32 Pro vB
GTM32Pro_vB.jpg (530.32 KiB) Viewed 10652 times
IMG_9002.png
GTM32 Pro vA
IMG_9002.png (736.33 KiB) Viewed 10677 times
GTM32vA&vB.jpg
GTM32 vA & vB
GTM32vA&vB.jpg (600.58 KiB) Viewed 10677 times
Last edited by _kaktus_ on Mon May 28, 2018 10:09 pm, edited 1 time in total.

dave m
Posts: 2
Joined: Fri May 25, 2018 1:13 pm
Location: New Zealand

Re: Control boards..........

Post by dave m » Mon May 28, 2018 11:40 am

Thanks `kaktus` that solves a few problems.......... Dave M.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Control boards..........

Post by _kaktus_ » Thu Jan 16, 2020 6:52 pm

:D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply