Upgrading from A30M to A30T - No UI upgrading?

Post Reply
AlexanderMason
Posts: 5
Joined: Wed Jun 17, 2020 9:06 pm

Upgrading from A30M to A30T - No UI upgrading?

Post by AlexanderMason » Sun Jun 21, 2020 12:47 pm

Hi,

I have successfully updated my A30M to an A30T(info shows A30T). Only the display UI files don't show the correct parts(mixing interface with 3 extruder) of an A30T.

I follow the step by step guide at the firmware on the side.omegle xender

-> Put the system and the A30T_S02_V1_01.bin to root card.
-> add a config.txt (with boot:1;bin_name:A30T_S02_V1_01.bin;) to root of sd card
-> start printer again
-> nothing happen

I checked the usb port on the side and directly on the mainboard.

What can I do? Any helps?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Upgrading from A30M to A30T - No UI upgrading?

Post by William » Mon Jun 22, 2020 2:33 pm

Hi, SD card should be put in
QQ图片20200622143055.png
QQ图片20200622143055.png (769.39 KiB) Viewed 2747 times
to this card slot.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply