Simplify3D and A30 issue

Post Reply
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Simplify3D and A30 issue

Post by William » Sun Jun 09, 2019 9:37 am

Hi, You can 1. Check if the coupling is installed correctly.
             2. Whether the lead screw is bent;
             3. Check the driver board voltage (0.8-1.2V).
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech A30 Series”