Hard point on z axi

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: Hard point on z axi

Post by Briciou62500 » Tue Sep 17, 2019 2:41 am

Look the screw.
Attachments
IMG_20190916_201012.jpg
IMG_20190916_201012.jpg (273.92 KiB) Viewed 6553 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Hard point on z axi

Post by William » Tue Sep 17, 2019 9:08 am

OH, if the one shown now is the same as the one you provided, you need to fix it.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: Hard point on z axi

Post by Briciou62500 » Tue Sep 17, 2019 2:38 pm

What should I fix, I do not understand well? :) In the photo, the 2 new support (front and back) are installed, they are new. In fact I have the impression that the hole of the support falls before the hole of the wheel the support should I think to come more to the right. But that can not be solved if the geeetech A30?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Hard point on z axi

Post by William » Tue Sep 17, 2019 3:14 pm

:D Installation location you can refer to:
P90917-151130.jpg
P90917-151130.jpg (329.02 KiB) Viewed 6541 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: Hard point on z axi

Post by Briciou62500 » Tue Sep 17, 2019 4:16 pm

My screw is more longer. No ?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Hard point on z axi

Post by William » Tue Sep 17, 2019 5:16 pm

Hi,Do you remember how you removed it?
You need to fix it with a screw.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: Hard point on z axi

Post by Briciou62500 » Tue Sep 17, 2019 5:58 pm

No, I thought the bearing screws were all the same size.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Hard point on z axi

Post by William » Tue Sep 17, 2019 6:06 pm

:D Oh,Can it be fixed now?
I am not very clear about what you mean.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: Hard point on z axi

Post by Briciou62500 » Tue Sep 17, 2019 6:27 pm

I'm at work, 1 hour from home :)
Tonight, I'll see to redo pictures for you to understand better.

Post Reply