Firmware for 3DTouch auto bed leveling sensor

Post Reply
eldianel
Posts: 4
Joined: Tue Jan 09, 2018 9:51 am

Firmware for 3DTouch auto bed leveling sensor

Post by eldianel » Sun Apr 15, 2018 7:40 am

Hi !

i have buy a Geeetech 3DTouch auto bed leveling sensor
but i need the firmware for my Giantarm D200
for configure this sensor.

Thanks !

RolandTruter
Posts: 2
Joined: Thu Nov 02, 2017 8:01 pm

Re: Firmware for 3DTouch auto bed leveling sensor

Post by RolandTruter » Thu Apr 26, 2018 3:35 pm

I also need to attach a Sensor.

I need the Config.h File of my I3 M201 printer.

Any help would be appreciated.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Firmware for 3DTouch auto bed leveling sensor

Post by _kaktus_ » Fri Apr 27, 2018 11:07 pm

Roland our printer model (M201) does not work with this sensor.

fr0gman
Posts: 4
Joined: Fri Nov 02, 2018 1:52 pm

Re: Firmware for 3DTouch auto bed leveling sensor

Post by fr0gman » Mon Feb 11, 2019 5:54 am

The d200 is one of the easiest to level I have ever had. It also holds level quite well. Why would you need auto leveling?
eldianel wrote:
Sun Apr 15, 2018 7:40 am
Hi !

i have buy a Geeetech 3DTouch auto bed leveling sensor
but i need the firmware for my Giantarm D200
for configure this sensor.

Thanks !

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: Firmware for 3DTouch auto bed leveling sensor

Post by Admin » Wed Jul 10, 2019 9:27 am

hello,
D200 does not support 3d touch, there is no corresponding firmware.

Christin1e
Posts: 1
Joined: Fri Apr 17, 2020 4:07 pm

Re: Firmware for 3DTouch auto bed leveling sensor

Post by Christin1e » Fri Apr 17, 2020 4:11 pm

Bi linear bed leveling is when the printer levels the bed itself without you having to manually do it using knobs tellpopeyes

reubenkiyan
Posts: 1
Joined: Thu Jul 21, 2022 2:12 am

Re: Firmware for 3DTouch auto bed leveling sensor

Post by reubenkiyan » Thu Jul 21, 2022 2:13 am

i have buy a Geeetech 3DTouch auto bed leveling sensor
but i need the firmware for my Giantarm D200
for configure this sensor.

Post Reply