E180 Extrusion Problems

Post Reply
Orochimaru
Posts: 4
Joined: Fri Jun 11, 2021 5:40 am

E180 Extrusion Problems

Post by Orochimaru » Fri Oct 22, 2021 10:39 pm

Hello everyone,

I got Geeetech E180 Mini 3D printer and suddenly it prints everything like a sponge (Easy to crash). I look after every possible solution around the internet. I even https://showbox.tools/ changed the nozzle. I cleaned the machine. I tried different setting and software. Nothing is working with me.

Can anyone help me to solve this problem?

Thank you.

RichardL
Posts: 7
Joined: Sun Dec 05, 2021 9:30 am

Re: E180 Extrusion Problems

Post by RichardL » Mon Dec 06, 2021 4:53 pm

Orochimaru wrote:
Fri Oct 22, 2021 10:39 pm
Hello everyone,

I got Geeetech E180 Mini 3D printer and suddenly it prints everything like a sponge (Easy to crash). I look after every possible solution around the internet. I even https://showbox.tools/ changed the nozzle. I cleaned the machine. I tried different setting and software. Nothing is working with me.

Can anyone help me to solve this problem?

Thank you.
You can check the following:
1. the extruder gears: check teeth of your gear if they worn out. or you just purchase a new gear from Alixxx and replace it. Remember to tighten the screws when you put new one in
2. Check your extruder EStep after you put new gears one in to ensure the ESteps are accurate.
3. Increase the percentage of material flow in Easyprint3D, yes I still using it and it works great
4. pretty sure you did but worth to remind, check bed levelling

Hope that help.

run3donlineaz
Posts: 4
Joined: Mon Dec 13, 2021 5:20 pm

Re: E180 Extrusion Problems

Post by run3donlineaz » Fri Apr 22, 2022 4:37 pm

I have read your article; it is very informative and helpful for me. I admire the valuable information you offer in your articles. Thanks for posting it.
play snake

lukcybella147
Posts: 1
Joined: Wed May 11, 2022 3:04 pm

Re: E180 Extrusion Problems

Post by lukcybella147 » Wed May 11, 2022 3:06 pm

it has brought new knowledge to me, articles like this are very helpful to many people, looking forward to reading more articles like this.
2048 cupcakes fnaf 2

Stanford Attestation Services
Posts: 1
Joined: Tue Jun 28, 2022 3:29 pm

Re: E180 Extrusion Problems

Post by Stanford Attestation Services » Tue Jun 28, 2022 3:34 pm

STANFORD ATTESTATION SERVICES
We have a highly experienced & passionate legalization team for unique documents attestation who takes care of our services locally and globally. We offer the best and most competitive quotes for Certificate Attestation, Apostille, UAE Embassy attestation, and Legal Translation services to help drive the success of the requirement, whether it is for employment, visa, or business setup. We stand for excellence and uniqueness. We are happy to be the point of contact for all your documents attestation needs.https://www.attestationservices.ae/birt ... ttestation

Post Reply