E180 Hardware and Software Upgrade

apak
Posts: 48
Joined: Fri Jul 20, 2018 4:01 pm

Re: E180 Hardware and Software Upgrade

Post by apak » Fri Dec 13, 2019 3:21 pm

I can send you a gtm32 and a display free of charge if you want to (from my e180)

But geeetech should release tft source code for instance, and if your are going to do their job, at least they could send you spare parts

tokar2222
Posts: 9
Joined: Sun Jun 30, 2019 7:22 pm

Re: E180 Hardware and Software Upgrade

Post by tokar2222 » Sat Dec 14, 2019 3:10 am

E180 is not created to be a the best 3d printer. Need to be compact and cheap and IT IS. I bought it to play and learn, and I get everything :D
Another free evening so I start with wiring
Till now just issue with setup marlin, im complet amator with programing. Big thanks for our friend APAK for make so extremely easy and clear "How to" step by step instruction so E180 should survive :twisted: my experiment.

tokar2222
Posts: 9
Joined: Sun Jun 30, 2019 7:22 pm

Re: E180 Hardware and Software Upgrade

Post by tokar2222 » Sun Dec 15, 2019 6:51 pm

So after 2 days of playing with wires, everything start to looking like 3D printer.
To do list :
- Second extruder for PLA
- Hotbed wiring
- Led on Printing area
-BT installation
-Power supplier

Issue:
Im very happy because there was no biger issue, work step by step and plug and play, as I mentioned APAK dit it extremely cleary. Difficult is only Marlin installation setup for Me.

apak
Posts: 48
Joined: Fri Jul 20, 2018 4:01 pm

Re: E180 Hardware and Software Upgrade

Post by apak » Mon Dec 16, 2019 4:59 am

BT for a 130x130 bed??? are you serious? don´t bother man....

tokar2222
Posts: 9
Joined: Sun Jun 30, 2019 7:22 pm

Re: E180 Hardware and Software Upgrade

Post by tokar2222 » Fri Dec 20, 2019 3:44 am

Why not? Is nice feature. SKR don't like BT, but it will. Already 6 day of reflashing marlin

apak
Posts: 48
Joined: Fri Jul 20, 2018 4:01 pm

Re: E180 Hardware and Software Upgrade

Post by apak » Fri Dec 20, 2019 7:42 am

it´s a wste of resources, a 130x130 bed does not need BL

Post Reply