E180 extruder

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: E180 extruder

Post by William » Mon Jul 08, 2019 9:40 am

Hi, you can contract your seller.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

apak
Posts: 48
Joined: Fri Jul 20, 2018 4:01 pm

Re: E180 extruder

Post by apak » Wed Jul 10, 2019 4:22 am

https://www.thingiverse.com/thing:3680288

This is one of the best things you could do....

Replace extruder for a allmetal or a dual drive (bmg), and hotend with a v6

In my thingiverse file, you´ll find all you need, and could change everythinbg, just the hotend, just the extruder....but I recomend you to change the whole thing since you won´t get refund or repair.

abbyy666
Posts: 1
Joined: Wed Mar 10, 2021 12:18 am

Re: E180 extruder

Post by abbyy666 » Wed Mar 10, 2021 12:23 am

You could compile a E180 heated bed firmware from github, but you can not do it with the screen FW.

Board github is not been updated in more than a year, screen fw is not available, marlin 2 is not yet suported and not soon to be.

I just change electronics and everything works perfectly since ever.

cps test ninjaclicker

Post Reply