E180 Mini print directly from Cura

Post Reply
ALE5510
Posts: 3
Joined: Tue May 08, 2018 4:47 pm

E180 Mini print directly from Cura

Post by ALE5510 » Fri May 25, 2018 5:14 pm

I'm new and quite (very xD) inexperienced by 3d printers.
I have for a couple of days the E180 Mini that I managed to miraculously connect it in wifi.
Now I would like to know kindly if you can print directly from Cura.

P.S. I have already connected the printer to EasyPrint 3d and updated.

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: E180 Mini print directly from Cura

Post by Gingko » Wed May 30, 2018 6:37 pm

Yes, you can also print with cura, it connects to your printer automatically,
and you can also find configs from forum.

ALE5510
Posts: 3
Joined: Tue May 08, 2018 4:47 pm

Re: E180 Mini print directly from Cura

Post by ALE5510 » Wed May 30, 2018 10:58 pm

Could you paste the link on how to set up the connection of the E180 mini with care to print directly? I can not find it. Thank you! =)

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: E180 Mini print directly from Cura

Post by Gingko » Thu May 31, 2018 11:29 am


User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: E180 Mini print directly from Cura

Post by _kaktus_ » Thu May 31, 2018 11:35 am

Searching the forum and reading its content you will get a lot of practical and very helpful information.
In this way, you will gain knowledge which will allow you to solve your problems on your own.

adda
Posts: 4
Joined: Tue May 29, 2018 2:16 pm

Re: E180 Mini print directly from Cura

Post by adda » Sun Jul 01, 2018 2:01 am

Has somebody else issues with the new Cura release 3.4.0 ? The E180 profile for Cura does not work with this new version for me. With the former release 3.3.1 I did not have any problems.

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: E180 Mini print directly from Cura

Post by Gingko » Tue Jul 03, 2018 4:40 pm

adda wrote:
Sun Jul 01, 2018 2:01 am
Has somebody else issues with the new Cura release 3.4.0 ? The E180 profile for Cura does not work with this new version for me. With the former release 3.3.1 I did not have any problems.
"does not work" means Cura cannot detect/connect with your printer or just cannot upload the file?

adda
Posts: 4
Joined: Tue May 29, 2018 2:16 pm

Re: E180 Mini print directly from Cura

Post by adda » Wed Jul 04, 2018 5:28 am

It means Cura 3.4.0 connects with the printer but prints bull shit and stops after a while 😩

Odessa
Posts: 1
Joined: Mon Nov 16, 2020 2:38 pm

Re: E180 Mini print directly from Cura

Post by Odessa » Mon Nov 16, 2020 2:39 pm

Here is the article is about the products used for the welfare of human beings and many more. I referred to you please purchase all items by custom dissertation service and gives your feedback I m waiting for your opinion.

wiluxisup
Posts: 1
Joined: Fri Nov 27, 2020 2:26 pm

Re: E180 Mini print directly from Cura

Post by wiluxisup » Fri Nov 27, 2020 2:27 pm

There are companies that are inventing their new machinery so that they can help all users. On the other hand, school bus hire is there for following the new things that are based on new concepts.

Post Reply