E180 Belt tensioning

[GeeetechUK]

Is there anyway to adjust the tension on the x axis without total dismantling the printer?

[William]

Hi GeeetechUK
Here are some steps to adjust the tension on the x axis
Sorry, the X-axis needs to be disassembled to adjust the belt
1.Remove the motor cable and screws

E180-Belt1.png (850.5 KiB) Viewed 7414 times

2.Remove the Teflon tube and extruder cable

E180-Belt2.png (1009.32 KiB) Viewed 7414 times

3.Refer the pic and remove the screws

E180-Belt3.png (1.42 MiB) Viewed 7414 times

4.

E180-Belt4.png (966.86 KiB) Viewed 7414 times

5.Remove the belt carefully

E180-Belt5.png (1.5 MiB) Viewed 7414 times

6.Clean the glue carefully

E180-Belt6.png (1.19 MiB) Viewed 7414 times

7.Then you can remove it off and you can adjust it

E180-Belt7.png (1.64 MiB) Viewed 7414 times

[GeeetechUK]

Hi
I get to not but cannot get the cover off. Ant tips?

[GeeetechUK]

Fixed
Thanks for the help