LCD display turns only green

Post Reply
Jassim
Posts: 1
Joined: Tue Jan 14, 2020 8:11 pm

LCD display turns only green

Post by Jassim » Tue Jan 14, 2020 8:15 pm

Hello,
I bought 4 days before Acryl Prusa I3 Pro B. Machine prints well with Repetier-Host and USB, but I have a problem. The LCD display turns green and don't have any symbols on it. I checked the cables for the SD card and the display, it OK. Also when I press the main switch board beep.https://speedtest.vet/ https://vidmate.bid/ https://123-movies.red/

I will ask for help!
Last edited by Jassim on Fri Jan 17, 2020 11:57 am, edited 1 time in total.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: LCD display turns only green

Post by William » Wed Jan 15, 2020 9:27 am

:D Hi, You can plug and unplug the screen,
This may be caused by poor wiring or signal interference.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Reese89
Posts: 1
Joined: Mon Mar 14, 2022 7:07 pm

Re: LCD display turns only green

Post by Reese89 » Mon Mar 14, 2022 7:40 pm

The problem with the display being green is caused by a bad connection between the monitor and the video card (specifically the data cable). This cable is what sends the information from the video card to the monitor. If it does not have a good connection, then the monitor will not receive the information correctly and show a distorted image or no image at all. However, I have to solve it. Meanwhile, Best Assignment Services is handling my academic burden. It feels so good to hire the service of professional individuals.

Post Reply