Page 1 of 1

How is Geeetech I3 as a beginner printer?

Posted: Wed Apr 10, 2019 1:27 pm
by stevenshaw
I bought the Geeetech I3 Pro B a couple of weeks ago as my first printer. It should be basically the same machine, but with metal parts instead of the 3D printed parts.

I quite enjoyed putting the kit together and getting it to work, but it didn't really put up a fight, except for some unaligned rods, incomplete or missing instructions etc..

I printed about 300g so far and I'm really happy with the standard results. That said, I will be adding and changing some stuff in the next couple of weeks, already ordered the parts, we'll see when I find the time.

So, as a beginner, I would recommend it. There is still the possibility of me being totally lucky with it, but if you decide to buy a cheap chinese printer kit, you kind of know, what you are getting into.

Re: How is Geeetech I3 as a beginner printer?

Posted: Thu Apr 11, 2019 5:27 pm
by William
Thanks for your sharing!
It is a little difficult for the beginner.
But I think the beginner needs to be patience.
Try and try again, refer to the video on Youtube.
Then you will succeed and you will be proud of your try.