Rostock 301 not completing print from SD Card

Post Reply
OldFred
Posts: 1
Joined: Sun Apr 16, 2017 12:25 pm

Rostock 301 not completing print from SD Card

Post by OldFred » Thu Aug 24, 2017 9:39 am

HI there. My rostock 301 will not get any further than 4% when printing from the SD Card. I have tried different SD Cards and they all work on I3 Aluminium. The printer completes the print when using the USB cable.
Can someone help.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Rostock 301 not completing print from SD Card

Post by William » Thu Aug 24, 2017 4:36 pm

You can press the SD slot and confirm the connection between the SD card and the SD slot is OK.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Carlo Heller
Posts: 1
Joined: Tue Jan 25, 2022 4:34 pm

Re: Rostock 301 not completing print from SD Card

Post by Carlo Heller » Tue Jan 25, 2022 5:26 pm

I was having issues with the stock Rostock 301 heated bed not completing the print from SD Card. After many hours of troubleshooting, I have read paperhelp review and found that inserting a piece of tape between the connector and the bottom of the bed worked 100% of the time. Hope this helps someone else out there.

Post Reply