Prusa I3 pro b extruder fails

Post Reply
josemr1967
Posts: 1
Joined: Fri Feb 24, 2017 8:51 pm

Prusa I3 pro b extruder fails

Post by josemr1967 » Fri Feb 24, 2017 9:19 pm

My 3d printer start printing but it stop taking filament and stop printing. I have revised everything but the extruder keeps failing. Need help.

Newopint95
Posts: 76
Joined: Sun Mar 12, 2017 8:14 pm

Re: Prusa I3 pro b extruder fails

Post by Newopint95 » Sun Mar 26, 2017 9:57 am

Does the extruder turn without filiment installed?

Have you tried plugging it into the port for the x or y axis motor to verify that the stepper motor on the extruder is Ok?
What about swapping the motor controller from one of the other motors for the extruders controller?
Have you checked the voltage being sent to the extruder motor?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Prusa I3 pro b extruder fails

Post by William » Fri Mar 31, 2017 11:31 am

Hi,there is a post related to your question,and please make the troubleshooting.viewtopic.php?f=19&t=17097. :D Hope it can help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

kidesixyso
Posts: 1
Joined: Sat Sep 19, 2020 4:25 pm

Re: Prusa I3 pro b extruder fails

Post by kidesixyso » Sat Sep 19, 2020 4:26 pm

Different components are evolve in 3D printer so that we should learn all the working of their components. Major drawback of uk best essay review is that it is really expensive having cartridge being with it.

followersitaly
Posts: 8
Joined: Mon Aug 31, 2020 3:58 pm

Re: Prusa I3 pro b extruder fails

Post by followersitaly » Sat Oct 10, 2020 6:59 pm

See what people are saying on Extruder is not feeding. ... Btw. the stepper didn't feed when I've got my CTC Prusa i3 pro B with GT2650, but it was only ... Another problem I had with that printer was that the bed was much colder than shown in ...
followers italy

followersitaly
Posts: 8
Joined: Mon Aug 31, 2020 3:58 pm

Re: Prusa I3 pro b extruder fails

Post by followersitaly » Sat Oct 10, 2020 7:04 pm

I've recently purchased my first 3D printer; a low budget CTC i3 Pro B, which is ... I took the extruder assembly apart and tested the stepper motor separately to see if ... The problem therefore seems to lie within the control board, or the stock ...
buy instagram followers cheap

followersitaly
Posts: 8
Joined: Mon Aug 31, 2020 3:58 pm

Re: Prusa I3 pro b extruder fails

Post by followersitaly » Sat Oct 10, 2020 7:04 pm

, Geeetech 3D printer Trouble shooting guide. 2, problem, details ... you need if you are going to upgrade your I3 Pro B to a dual extruder printer ..instagram followers uk

Post Reply