Upgrade Firmware with easy print

AlexG
Posts: 2
Joined: Thu Jun 28, 2018 7:12 pm

Re: Upgrade Firmware with easy print

Post by AlexG » Mon Jul 02, 2018 8:33 pm

It is impossible for me to make my printer work. First of all I couldn't uppload the firmware with Arduino, I talked with Geeetech Suport and they told me to change some parameters in the boards file of the arduino installation. After doing that I was able to uppload the firmware but I can only see black squares in the LCD display, it is well wired, I uplloaded the right version of the firmware (Prusa i3 Pro W). If I try to update the firmware with EasyPrint 3D I cant neither do it with 1.0.19 or 1.1.7 version. I'm just tired of googling for answers, before this I didnt know if buy a pre-assembled printer or assemble one by myself, now I can see the answer with clarity, if I cant make this printer work I will just buy an assembled one.
This is what I see when I try to update the firmware via EasyPrint 3D:
https://ibb.co/hunMnJ

User avatar
_kaktus_
Site Admin
Posts: 1255
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Upgrade Firmware with easy print

Post by _kaktus_ » Tue Jul 03, 2018 12:42 pm

I'm sure my message won't help you, but I'll tell you so.
;)
If others have managed it, you will be able to do it as well.
Maybe at the beginning it is difficult because you still have too little knowledge and you need to read more.
Treat it as learning about your machine.

Perhaps you are in a crisis now. In a moment you will laugh at this situation.

So the head up and forward. :)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: Upgrade Firmware with easy print

Post by Gingko » Tue Jul 03, 2018 7:53 pm

AlexG wrote:
Mon Jul 02, 2018 8:33 pm
It is impossible for me to make my printer work. First of all I couldn't uppload the firmware with Arduino, I talked with Geeetech Suport and they told me to change some parameters in the boards file of the arduino installation. After doing that I was able to uppload the firmware but I can only see black squares in the LCD display, it is well wired, I uplloaded the right version of the firmware (Prusa i3 Pro W). If I try to update the firmware with EasyPrint 3D I cant neither do it with 1.0.19 or 1.1.7 version. I'm just tired of googling for answers, before this I didnt know if buy a pre-assembled printer or assemble one by myself, now I can see the answer with clarity, if I cant make this printer work I will just buy an assembled one.
This is what I see when I try to update the firmware via EasyPrint 3D:
Image
Hi, Alex
If you use Arduino to upload the firmware, choose the right COM port and board(Mega 2560), the firmware on the forum has no bug and can be upload successfully, I tried that several times. ;)

If you are using EasyPrint, try with baud rate 256000.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests