EasyPrint3D aborts when slicing - without an error message

Post Reply
JRichi
Posts: 7
Joined: Wed Apr 01, 2020 4:45 pm

EasyPrint3D aborts when slicing - without an error message

Post by JRichi » Wed Apr 01, 2020 8:50 pm

I have Windows 10.
Slicing seems to start correctly. Before the progress display starts, the EasyPrint3D program breaks down completely. Without an error.
The button Done! I can’t click. The gcode file is also not yet created.
What can I do?
Attachments
slicing_abord.png
slicing_abord.png (147.8 KiB) Viewed 21902 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: EasyPrint3D aborts when slicing - without an error message

Post by William » Thu Apr 02, 2020 9:25 am

Hi, can you provide your stl?
and you can try slice another model.
you can use Repetier Host to slice.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

JRichi
Posts: 7
Joined: Wed Apr 01, 2020 4:45 pm

Re: EasyPrint3D aborts when slicing - without an error message

Post by JRichi » Fri Apr 03, 2020 5:02 pm

Hi William

the program always stops with the *.stl:
Program example files: deer.stl, case.stl
ASCII: comp01.dae_A.stl, test3.dae_A.stl
Binary: comp01.dae_B.stl, test3.dae_B.stl

I think the problem is not with the files.

-------------------
I am a newbie.
What you mean with "... use Repetier Host..."
-------------------

With Ultimaker 4.5 I can create the *.gcode files from the *.dae files. There are no problems.

Regards Juergen
Attachments
test3.dae_B.stl.png
test3.dae_B.stl.png (191.51 KiB) Viewed 21850 times
dateien.zip
(18.11 KiB) Downloaded 498 times

JRichi
Posts: 7
Joined: Wed Apr 01, 2020 4:45 pm

Re: EasyPrint3D aborts when slicing - without an error message

Post by JRichi » Thu Apr 16, 2020 2:57 am

Hi Wiliam,

I reinstalled the EasyPrint 3D program and the printer driver.
The result is the same. Slicing stops without an error message.

Wenn ich das Slicing mit Ultimaker Cura 4.5

If I do slicing with Ultimaker Cura 4.5 then I can easily load the *.gcode file.

I have linked the *.gcode extension to the EasyPrint3D program.

When I double click on a *.gcode file I get an error message:
System.IO.FileNotFoundException: img/Disconnect.png
bei System.Drawing.Image.FromFile(String filename, Boolean useEmbeddedColorManagement)
bei RepetierHost.view.ThreeDControl.UpdatePrintPanel(Object sender, EventArgs e)
bei System.Windows.Forms.Timer.OnTick(EventArgs e)
bei System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

The program can then no longer be continued.

I would be very happy to receive a response.

Regards Juergen
Attachments
Errormessage.png
Errormessage.png (21.69 KiB) Viewed 19867 times

Post Reply