GeeeTech E180 No Printing - Code: Error Abnormal Temperature

Post Reply
stampa7
Posts: 1
Joined: Sat Dec 18, 2021 2:37 am

GeeeTech E180 No Printing - Code: Error Abnormal Temperature

Post by stampa7 » Fri Dec 24, 2021 2:13 am

GeeeTech E160 HardwareV.1.6 no longer prints.
Code: Error -0- Abnormal temperature.
The temperature is shown in the display, but the nozzle does not get hot.
Thermistor shows 5.26 kΏ by room temperature.
Nozzle externally heated via bypass from the laboratory power supply, 3 D printing is possible.
What could be the cause.
I have no idea what to do about it.
Thanks

Morgest
Posts: 12
Joined: Thu Oct 25, 2018 6:01 pm

Re: GeeeTech E180 No Printing - Code: Error Abnormal Temperature

Post by Morgest » Mon May 23, 2022 2:33 am

If language is the problem where you are making mistake in computer but computer only understand 0 and 1 language to take commands of also you can take things seriously to understand and gain knowledge from https://essayscholar.com/ for your homework that might being done in a wrong way. if you use this website for your further use then you will be surely understood too much things about those behave that supposed not to ignore in writing

Post Reply