3D Touch G29 ignoring x-axis limitation - What can I DO?

Post Reply
ervinjason
Posts: 1
Joined: Wed Mar 30, 2022 4:59 am

3D Touch G29 ignoring x-axis limitation - What can I DO?

Post by ervinjason » Wed Mar 30, 2022 5:07 am

i got a problem while adapting my firmware for my new 3DTouch sensor.

i own a geeetech i3 pro c (dual) and i successfully installed the sensor (after a few hours...)

currently i can G28 (home all axis) fine.

but with G29 (autolevel) my x-axis is going crazy and ignores my build dimensions completely:

https://www.dropbox.com/s/ojgai588y35oh ... l.mp4?dl=0

it doesn't matter if

define X_MAX_POS 180 (current profile)
or
define X_MAX_POS 130 (just testing)

the printer always moves over the limit and the belt is tortured

suggestions are welcome :-)
you can edit videos with alight motion on pc with the help of an emulator. Alight Motion is an Android app but you can use it on PC/Windows or MAC with an Android Emulator.

hoadao3493
Posts: 6
Joined: Fri Dec 31, 2021 10:03 pm

Re: 3D Touch G29 ignoring x-axis limitation - What can I DO?

Post by hoadao3493 » Sun Apr 17, 2022 12:29 am

Your article is very good and useful, thank you for sharing, tdtc hopes that next time you will have more good articles to send to all readers.

Post Reply