E180 ABS

Post Reply
inkwizitiv
Posts: 6
Joined: Sat Jul 07, 2018 1:03 am

E180 ABS

Post by inkwizitiv » Sat Feb 02, 2019 9:36 pm

Is there a way to trick or mod the E180 printer to run hotter to print ABS or nylon more than 240 c

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: E180 ABS

Post by _kaktus_ » Sun Feb 03, 2019 4:01 am

Hello.
:mrgreen:

In order to print from ABS, it is also necessary to have a heated bed.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

inkwizitiv
Posts: 6
Joined: Sat Jul 07, 2018 1:03 am

Re: E180 ABS

Post by inkwizitiv » Sun Feb 03, 2019 11:43 pm

Heat bed is no problem just need the nozzle to run hotter

apak
Posts: 48
Joined: Fri Jul 20, 2018 4:01 pm

Re: E180 ABS

Post by apak » Mon Feb 04, 2019 5:23 pm

how did you manage to have a heated bed with E180?

Post Reply