3d touch wont deploy pin and slams into the bed

frappè
Posts: 1
Joined: Sat Oct 31, 2020 12:40 am

Re: 3d touch wont deploy pin and slams into the bed

Post by frappè » Sat Oct 31, 2020 12:41 am

Hi,

did you manage to fix this issue?

Thanks

ikke
Posts: 1
Joined: Tue Nov 03, 2020 12:40 am

Re: 3d touch wont deploy pin and slams into the bed

Post by ikke » Tue Nov 03, 2020 12:45 am

In my case (I3 pro X - 2560 A+ board), the wiring was the issue. The 3D Touch signal wire (orange) is on the side, the Z_MAX signal pin on the board is in the middle. After correcting the cable for this, the 3D Touch worked.

Post Reply