NOTE! This fan duct only fits when the hotend is mounted as shown in the pictures.
The fan duct hangs on the side of the extruder stepper motor, attach however you like, with dubble sided tape or just let it hang if you get enough snug fit.
You have to make your own holes for the screws for the fan.
ANOTHER NOTE! I don't know how well this fanduct works, I've never printed with another fan duct and this is my first fan duct design.
Rotate the STL and print without support.
Printed in ABS. Since it's so close to the hotend, I think it might be wise to use more heat resistant plastic.
http://www.thingiverse.com/thing:2124737
