Something you need to know before using 3D Touch

NicoFR
Posts: 6
Joined: Sun Dec 18, 2016 12:59 am

Re: Something you need to know before using 3D Touch

Post by NicoFR » Sat Mar 04, 2017 11:07 pm

Thanks for all your tips ! Still remaining one issue in my case.
In the wiki, it is mentionned :

"From the display go to Menu and then Prepare/Move Axis/0.1mm/Move Z"
"Now move the Z axis slowly down..."

but I can only move it up in this case, either using Repetier.

Do I also need to tweak some other files in the firmware ?

--> Ok modified this to allow movement over the HOMEPOS:

Code: Select all

#define min_software_endstops false

DoubleK
Posts: 15
Joined: Fri Dec 09, 2016 5:39 am

Re: Something you need to know before using 3D Touch

Post by DoubleK » Wed Aug 02, 2017 3:36 am

My setting have no function.
//#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.24 in the config.h
M 851says Echo:Z Offset -3.24

but the nozzle is to far from the bed. the distance does not change after modify the config.h

Lellos72
Posts: 2
Joined: Fri Dec 20, 2019 4:57 am

Re: Something you need to know before using 3D Touch

Post by Lellos72 » Mon Jan 06, 2020 8:45 pm

DoubleK wrote:
Wed Aug 02, 2017 3:36 am
My setting have no function.
//#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.24 in the config.h
M 851says Echo:Z Offset -3.24

but the nozzle is to far from the bed. the distance does not change after modify the config.h
I have the same problem, is it possible that nobody has the solution?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Something you need to know before using 3D Touch

Post by William » Tue Jan 07, 2020 9:21 am

:D Hi, When you adjust the z offset
Need modifications to you,
Save it.
You can refer to this specifically: viewtopic.php?f=27&t=18371
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply