Never been able to print

Post Reply
tkw9700
Posts: 1
Joined: Thu Mar 25, 2021 11:49 am

Never been able to print

Post by tkw9700 » Thu Mar 25, 2021 11:56 am

My husband bought me this printer a year or so ago and I have yet to get a single print from it. After adjusting and fine tuning the setting I got nothing. Now the x axis seems to get stuck and will not move correctly at all. Any suggestions??

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: Never been able to print

Post by Admin » Fri Mar 26, 2021 11:37 am

Hello, about printing, you can try to print some test files, such as this Cube, to see the effect, you can search for many related videos processed by slicing software on YouTube.
Regarding the problem of the X-axis stuck, please check whether the X-axis limit switch connection line is properly connected, and whether the limit switch can work normally by manually controlling the X-axis to ensure that the limit switch will not be turned on all the time.
You can also check the drive on the motherboard, exchange the drive of the X axis and the Y axis to see if the fault is exchanged, and eliminate the influence of the drive.
If you still have any questions, please contact geeetech official through ticket.
Attachments
ticket process.rar
(389.76 KiB) Downloaded 272 times
cube.rar
(116.75 KiB) Downloaded 283 times

Post Reply