My printer don't print

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

My printer don't print

Post by Briciou62500 » Mon Mar 23, 2020 3:59 pm

Hello,

I have try to print a tower temp with a new filament. But my printer doesn't print.
Attached is a photo of a temperature tower that is not printed.
The nozzle is new and the ptfe change not long ago.
Anyone know where my problem is coming from?

Thanks
Attachments
IMG_20200322_195031.jpg
IMG_20200322_195031.jpg (236.45 KiB) Viewed 23908 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: My printer don't print

Post by William » Mon Mar 23, 2020 4:04 pm

Hi, level the hotbed before printing,
PLA consumable printing temperature is generally around 210,
The extruder can then be calibrated.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: My printer don't print

Post by Briciou62500 » Mon Mar 23, 2020 4:22 pm

Thanks for your answer :)

My heating plate is level. How to calibrate my extruder, it's a geeetech a30

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: My printer don't print

Post by William » Mon Mar 23, 2020 4:24 pm

-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: My printer don't print

Post by Briciou62500 » Mon Mar 23, 2020 4:54 pm

Thank you,

Do I have to do step per mm? In the geeetech a30 there is bondtech or similar extruder?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: My printer don't print

Post by William » Mon Mar 23, 2020 5:00 pm

Hi, you can first, level the hot bed.
The distance between the nozzle and the hot bed is the distance of a piece of leveling paper,
then calibrate the extruder.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: My printer don't print

Post by Briciou62500 » Mon Mar 23, 2020 6:48 pm

I forgot to tell you that I am currently printing with the cold tray.
Because I have an error when I heat my tray :
Error : nozzle 0-temp the heating element is out of order! Please kill the job manually.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: My printer don't print

Post by William » Mon Mar 23, 2020 6:57 pm

Hi,you need to check whether the thermistor wiring at the hot end is fully connected or loose,
If not, you need to measure the thermistor,
Make sure that the hot end is normal for normal printing.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: My printer don't print

Post by Briciou62500 » Mon Mar 23, 2020 7:10 pm

Where is thermistor?
Attachments
15849617759733683405048783837664.jpg
15849617759733683405048783837664.jpg (291.54 KiB) Viewed 23892 times
15849617556847513282924076955917.jpg
15849617556847513282924076955917.jpg (224.32 KiB) Viewed 23892 times

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: My printer don't print

Post by Briciou62500 » Mon Mar 23, 2020 8:07 pm

I have disassemble my heating plate.
Attachments
IMG_20200323_130446.jpg
IMG_20200323_130446.jpg (257.86 KiB) Viewed 23892 times

Post Reply