Print Slanted on the Y Axis

Post Reply
NightStorm1000
Posts: 0
Joined: Thu Jan 04, 2018 8:14 am

Print Slanted on the Y Axis

Post by NightStorm1000 » Sat Jan 13, 2018 2:15 am

Hi!

I recently build my I3 Or and noticed something

My Prints come out slanted on the Y Axis

Any Idea?

Here is a Picture

https://www.dropbox.com/s/5zaqnype7wioa ... 5.jpg?dl=0

User avatar
William
Site Admin
Posts: 3979
Joined: Tue Jun 07, 2016 9:38 am

Re: Print Slanted on the Y Axis

Post by William » Wed Jan 17, 2018 7:59 pm

1.Check the belt of Y axis

2.Increase the voltage of Y-axis driver board A4988
ADJUST.png
ADJUST.png (206.02 KiB) Viewed 3062 times
3.Adjust the tight of Y-axis screw
Y motor.png
Y motor.png (839.18 KiB) Viewed 3062 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

NightStorm1000
Posts: 0
Joined: Thu Jan 04, 2018 8:14 am

Re: Print Slanted on the Y Axis

Post by NightStorm1000 » Wed Jan 24, 2018 5:05 am

Adjusting Acceleration, Jerk and Steps fixed it.
Thanks anyway!

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests