Geeetech

Hi, everyone!

We're currently undertaking a small survey (won't even take a minute to fill out) on printing with PLA and we need you to participate. We'd like to know what your experience with PLA is, whether you use it or not. This way, we'd like to be able to cater to your 3D printing needs. It'd be awesome if you could help us by filling out the survey on the following link: https://docs.google.com/forms/d/e/1FAIp ... sp=sf_link
Thank you very much for your help!

Best regards,
Stani

Do not buy FoxSmart pla . is erratic in extrusion. take too much heat to start and takes too much time to set fine tuning .

PLA is just great, because it doesn't have any smell. + it isn't too sensible to fast cooling.
Of course, some spools may be worse than others. While some users grumble that it won't stick to the plate anymore after some time, but it's not the issue with the PLA itself, it's the plate.

3D printing materials overview: PLA by Kerry Stevenson in fast essay