Every print fail.

Post Reply
Posts: 1
Joined: Sun Jan 22, 2017 7:25 pm

Every print fail.

Post by Juli199696 » Sun Jan 29, 2017 6:57 am

Hello guys, i got a Problem with my printimg extruision. Please take a look on the picture. Any idea to get rid of that? I tried so many things. Im New to 3d printing btw.
Thanks Juli199696
https://www.dropbox.com/s/3ieur600apmkr ... 1.JPG?dl=0
https://www.dropbox.com/s/4u6iucadsyerv ... 9.JPG?dl=0

Posts: 3
Joined: Fri Jan 29, 2016 2:18 am

Re: Every print fail.

Post by mike242 » Mon Jan 30, 2017 4:14 am


As you are new to 3D printing, do you know this Site?
https://www.simplify3d.com/support/prin ... eshooting/
There arme some generall explanations about Issues in 3D printing, even of you don't have Simplify3D.
What Printer, Host program and slicer do you use?
In the QuickStart Tutorial of my I3x pro Geeetech said, to set a 0,4mm nozzle in repetier host, but it has a 0,3mm nozzle.
This will cause some extrusion issues...
A Little more input will be helpful.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests