Geeetech

Hello. When i try to print the result is incorrect... I try like this (my video) https://www.youtube.com/watch?v=yUcZtLT ... e=youtu.be

and the result is:
http://3dtoday.ru/upload/main/f32/IMG_4722.JPG

Can someone help, what could be the problem?... Thanks!

Check if you can extrude some material using repetier without problems, check if you are using the right temperatures, remember to always keep your fan on to avoid clogs. If you can't extrude material you probably have clog. What slicer are you using? Try with craftware, repetier and slicer didn't work for me and my printer and now I have no problem with craftware but you'll have to use your sd card to print. And remember to calibrate as much as possible.

@Chiffa
Download this guide to level the bed:
http://www.geeetech.com/forum/download/file.php?id=2606

Thanks!

Hello,
Bonjour,

You will find the original text translated into English following this original French text.

Vous trouverez le texte original traduit en anglais à la suite du présent texte original en français.

Est-ce qu’aujourd'hui vous réussissez de belles impressions avec votre imprimante delta Geeetech Rostock 301 (M301) ?

Pas moi, je l'ai acheté le 24 septembre 2016 et reçu le 27 octobre 2016, mais aucune impression à ce jour, que des pièces défectueuses ou des erreurs de conception dans le choix des pièces ! Je suis en attente de pièces de remplacements.

Si comme moi vous n'avez pas de belles impressions 3D, voir des pistes de solution dans le sujet suivant :

http://www.geeetech.com/forum/viewtopic ... 27&t=18578

Cordialement,

L'ami René
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello,

Excuse me, I am unilingual francophone and I use Google translator to translate the texts of the forum in French and to write to you in English. Thank you for your understanding and your indulgence for these texts translated mechanically!

Do you make today beautiful prints with your Geeetech Rostock 301 (M301) delta printer?

Not me, I bought it on September 24, 2016 and received on October 27, 2016, but no impression to date, that defective parts or design errors in the choice of parts! I'm waiting for replacement parts.

If like me you do not have beautiful 3D impressions, see solution tracks in the following subject:

http://www.geeetech.com/forum/viewtopic ... 27&t=18578

Cordially,

Friend René