extrusion diverted please help me

Post Reply
gaudiosonicolas
Posts: 3
Joined: Tue Aug 02, 2016 12:31 am

extrusion diverted please help me

Post by gaudiosonicolas » Mon Aug 08, 2016 6:31 am

I have a i3 pro c.
IMG_0377.JPG
I have the problem that estrusión lines diverted out
IMG_0377.JPG (606.54 KiB) Viewed 2404 times
I have the problem that estrusión lines diverted out.
someone knows how to help me? thank you very much

User avatar
William
Site Admin
Posts: 4172
Joined: Tue Jun 07, 2016 9:38 am

Re: extrusion diverted please help me

Post by William » Mon Aug 08, 2016 9:05 am

gaudiosonicolas wrote:I have a i3 pro c.
IMG_0377.JPG
I have the problem that estrusión lines diverted out.
someone knows how to help me? thank you very much
Hi,
How the diverting out goes?Could you give more details?Have you levelled your heat bed and did you have a right nozzle size choice in your slicer settings?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

gaudiosonicolas
Posts: 3
Joined: Tue Aug 02, 2016 12:31 am

Re: extrusion diverted please help me

Post by gaudiosonicolas » Mon Aug 08, 2016 10:27 am

the hotbed is well calibrated. the nozzle is 0.4 and the repetier everything is properly configured. I doubt if it is a mechanical problem, but I can not find solution.

User avatar
William
Site Admin
Posts: 4172
Joined: Tue Jun 07, 2016 9:38 am

Re: extrusion diverted please help me

Post by William » Mon Aug 08, 2016 10:33 am

gaudiosonicolas wrote:the hotbed is well calibrated. the nozzle is 0.4 and the repetier everything is properly configured. I doubt if it is a mechanical problem, but I can not find solution.
OK,a video of printing would be appreciated.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest