prints flimsy

Post Reply
Gotrek
Posts: 4
Joined: Fri Feb 19, 2016 6:31 am

prints flimsy

Post by Gotrek » Sat Jul 09, 2016 11:31 pm

my last few prints have come out like this. Blue is ABS with extruder temp is 260 and white is PLA with extruder temp 210. Bed temp was 65-75 for both. Before prints were solid. The only thing new with the printer is I had to replace a stepper motor.
rsz_20160709_110511.jpg
rsz_20160709_110511.jpg (117.11 KiB) Viewed 2236 times
rsz_20160709_110408.jpg
rsz_20160709_110408.jpg (95.54 KiB) Viewed 2236 times

User avatar
William
Site Admin
Posts: 4192
Joined: Tue Jun 07, 2016 9:38 am

Re: prints flimsy

Post by William » Mon Jul 11, 2016 1:57 pm

Gotrek wrote:my last few prints have come out like this. Blue is ABS with extruder temp is 260 and white is PLA with extruder temp 210. Bed temp was 65-75 for both. Before prints were solid. The only thing new with the printer is I had to replace a stepper motor.
rsz_20160709_110511.jpg
rsz_20160709_110408.jpg
High temp for extruder...
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest